General > In General...

Cleaning your bike

<< < (3/5) > >>

machine:
Cam;

Where can we find that product???

hughes:
After my mud ride this weekend I had some real cleaning to do. After pressure washing to knock the big stuff off I found that a paint brush works really good for srcubbing all around the engine,pipe,and lower link,wheel hubs. It works every where and allows you to srcub in your cleaning chemicals.

gowen:
I can spot shine my bikes pretty much by just spray on Purple Power, then powerwash it off.. And Cam is absolutely correct!! Powerwashing without greasing really kills your linkage bearings. The pressure pushes the water in and it will rust it out. Anyway, I never have to scrub with purple power, it falls right off. No problem with fading plastic and have been doing it for years. I purchase it in 5 gallon buckets for like $12.

KXcam22:
Gowen,
  Who makes purple power?  I don't know if ive seen it here. For machine: that Motul silicone clean is at most bike shops. It looks like about 50 other motul spray products so you have to pick up the can and read it to identify it. Cam.

gowen:
http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=PRP&MfrPartNumber=4320P&CategoryCode=3226

That should have it there

Navigation

[0] Message Index

[#] Next page

[*] Previous page