Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
klx450/kx500
jBernard:
ah to bad.
well nice machining there. I ran a Doosan PUMA 280L lathe for about a year on 4340 and Inconel.
miss being out of that industry but it gave me some nice tools to design and make dirt bike parts! :evil:
dave916:
--- Quote from: ylwgtr on October 31, 2013, 12:46:06 PM ---hi kxpegger....Im running an auto decomp that kickstarts like a minibike....im also using the updated 410w starter off the new model....Also running a bit of oil in the case seems to help a bit as they are only pissy bushes on the bendix drive....infact i think because of my decomp i reckon my starter will be having an easy time comared to the undecomped 300 its designed to work with....no turning back....ive already paid for the parts....Im prepared to take one for the team ;)
--- End quote ---
fair play i am looking forward to see how this turn out
running the flywheel/generator/pulse pickup and a mappable CDI should be great mod
Most starter motors are pretty similiar in alot of models[the differance being the rear mounting bolt housing which is simple to change
The sm14 starter motor which i think the ktm has is common to R6 Cbr600 gsx600 etc
It may have the shorter sm14 which is fitted to a lot of tumpers 450 singles
i replaced my smr510 starter with the longer r6{cost about 20 quid}
good luck.
ylwgtr:
put a bumbag off a kdx200 on yesterday :)
ylwgtr:
heres the ktm flywheel sitting on the kx engine
ylwgtr:
ktm vs kx500 flywheel
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version