Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)

2011 kx250f chassis, what are my pipe options?

<< < (4/4)

RoostiusMaximus:
what silencer do I use?
Is the Service Honda pipe outlet going to accept a honda silencer? The KX pipe is larger at the end as stock right?

kxpegger:
The Service Honda pipe for a KX500AF is a CR500 pipe with a KX head welded on and that's all so the pipe will fit the Honda silencer. The silencer mid pipe is not a stock CR length for my Service Honda 2008 450F chassis. I can't remember if it's longer or shorter to fit the frame but it's for a Honda dimension pipe.

motopunk:
if you compare the red and green service-bikes, you could see that the pipes are the same. only diference are the little mods to fit to the kx-engine ..
i used an old stock-cr -pipe for my conversion , welded on the big-kx-exhaust-mount and 10mm longer at the rear section to fit right to the pc-silencer.

the service-kawasaki pipes exclusive made by fmf are very hard to get... the service-honda pipe is aftermarket: pro-circuit or fmf...

Navigation

[0] Message Index

[*] Previous page