Maintenance & Technical > KX500 Aluminum Frame Conversion (AFC)
KX500-KX250 manifold?
cmotodad:
Flyin,
Do you know if the KDX and the KX are the same? I purchased a KX mainfold and it is longer than the stock 500. It has a little more flex but puts the carb closer to the shock spring. Any ideas are appreciated.
The Flyin Hawaiian:
I dont know if the KX manifold is the same. Im using the 91-94 KDX250 manifold and it worked out well for me.
cmotodad:
I looked on ebay and the kx manifold looks different that the kdx. I will look for a kdx manifold to check before purchasing.
RoostDaddy:
I've run a KX250 boot on my 500 in the stock frame as it was shorter and placed the carb closer to the cylinder. Believe it's a '94 boot. Dont know that the angle is much different but was definitely shorter.
The Flyin Hawaiian:
I ran a 03 250 intake on my sf conversion and it fit but the inner diameter was much smaller and the airbox boot was too close for comfort (to the shock) for me. The KDX was longer, angled further away and uses the same reed cage as the 500.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version