Maintenance & Technical > KX500 Super Motard
2001 KX500 Kawasaki Supermoto
alward25:
The one indicator led is to show the power to the tailight and blinkers is on or off. that way you have control of it and a dummy light. i usually need as many as possible.
sandblaster:
--- Quote from: alward25 on November 10, 2012, 09:06:50 AM ---The one indicator led is to show the power to the tailight and blinkers is on or off. that way you have control of it and a dummy light. i usually need as many as possible.
--- End quote ---
Some guy told me that he liked it this way so that is what I did :-o
If I find it a problem I can always wire it so that it still has the indicator light and it won't run unless the light is on....
Then again I'm fairly lazy about such things and will probably forget all about it.
What were we talking about :?
sandblaster:
Just a quick update.
I've been sorting through the wiring.
I have the headlights, indicators, all switches, and turn signals all working even though I don't have any turn signals or rear brake light for the bike just yet.
Still sorting out the rear brake light.
The pressure switches are both working correctly so I know I'm close :-D
sandblaster:
I thought I had the turn indicators wired correctly. NO!!!! :-(
I took the harness apart again, found my mistake, and repaired it.
Now the turn indicators and turn signals light up correctly... :-)
I'm glad I don't do this for a living..
alward25:
Hope it was an easy fix. The wires should have been labeled. I hear it makes it easier :-D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version