Maintenance & Technical > KX500 Super Motard
2001 KX500 Kawasaki Supermoto
sandblaster:
It's amazing what a inch of seat height does. When I sit on it, it feels like a low rider :-o
You should come on up and take it for a spin.
Wheel color, why worry, rattle cans are cheap :evil:
sandblaster:
I was asked how I got the frame guard and the stand to work together since one interferes with the other.
First, I temporarily mounted the guard on the frame.
Then I took the stand, laid it against the guard and marked the guard.
Then I cut out the section that was interfering from the frame guard (Didn't do the best cut on it).
That left a small piece of aluminum left from the guard.
I used that small piece as a shim for the stand and mounted it using the bolts provided.
Yes, I drilled a hole through that small piece so it mounts flush with no wiggling around..
Thanks goes to those who gave me info or tried to get info about the best way to do this (Motorrad, Alward25)..
Foxx4Beaver:
--- Quote from: sandblaster on July 22, 2013, 07:55:47 AM ---(Didn't do the best cut on it).
--- End quote ---
not the best cut?....d**n...looks like it was meant to be there in the pic on the previous page....better than I'd probably do.
sandblaster:
It will work but I could have done better...
Ordered a non o-ring chain today.
It should help reduce tire wear :lol:
Motorrad:
Lots of HP to be found or lost in a O-ring chain
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version