KX Riders
  Home Help Login Register   *
Welcome, Guest. Please login or register.
Did you miss your activation email?
August 23, 2019, 08:39:35 AM

Login with username, password and session length
Recent
[Today at 05:55:21 AM]

[Today at 05:48:12 AM]

[August 22, 2019, 10:26:29 PM]

[August 22, 2019, 03:24:08 PM]

[August 22, 2019, 01:58:37 PM]

[August 22, 2019, 01:08:05 AM]

[August 14, 2019, 05:12:22 PM]

[August 12, 2019, 11:46:20 AM]

[August 12, 2019, 09:16:39 AM]

[August 12, 2019, 09:15:29 AM]

[August 12, 2019, 09:02:00 AM]

[August 07, 2019, 01:35:31 PM]

[August 05, 2019, 07:33:21 PM]

[August 05, 2019, 06:58:41 PM]

[August 04, 2019, 07:38:48 AM]
Pages: [1]   Go Down
  Print  
Author Topic: 05 KX250 no spark??  (Read 388 times)
0 Members and 1 Guest are viewing this topic.
Datgreentwo5iddy
Newbie
*
Offline Offline

Joined: 05.11.19
Posts: 3


« on: May 11, 2019, 05:10:07 AM »

Hey all!  Iím new here to the forum and after searching I didnít see what I was looking for.  So I apologize if this has been covered somewhere.  So as stated I have no spark. We are getting readings to the coil, but no spark on the plug.  Weíve checked the harness for continuity on all wires and all wires are showing good.  The pick up on the stator is showing proper reading.  The only thing we have come across so far that is a little off is the reading for the igniter wire off the stator.  Is it possible that could cause us to still get a reading on the ignition coil, but not enough to generate spark?  I obviously want to make the smartest move on buying the next part because stators arenít necessarily cheap and the CDI box sure as hell isn't either.  That brings me to my next question... if the CDI box was bad would I even be getting a reading on the coil?
Logged
KXDINO
Sr. Member
****
Offline Offline

Joined: 07.19.08
Posts: 487


« Reply #1 on: May 11, 2019, 07:15:41 PM »

make sure you check connection between plug cap and coil wire , before moving on.
Logged
Datgreentwo5iddy
Newbie
*
Offline Offline

Joined: 05.11.19
Posts: 3


« Reply #2 on: May 18, 2019, 10:31:33 AM »

Weíve checked that as well and itís good
Logged
KXDINO
Sr. Member
****
Offline Offline

Joined: 07.19.08
Posts: 487


« Reply #3 on: May 18, 2019, 02:16:10 PM »

find another 05 and ask them to swap parts to find the problem and do it while there , we had a ktm bike shop come to us with a 06 kx 250 , found out it was the stator. cdi boxes rarely give trouble.
Logged
Datgreentwo5iddy
Newbie
*
Offline Offline

Joined: 05.11.19
Posts: 3


« Reply #4 on: May 24, 2019, 04:55:17 PM »

Would it be possible to fry the CDI box if the previous owner put In a faulty stator?  He had some parts in box and there was a hacked up stator in there.  Looked like he may have tried to something with it in his attempt to fix it before he sold it.  Iím leaning towards it being the stator that is still the problem
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
TinyPortal v0.9.7 © Bloc
Valid XHTML 1.0! Valid CSS!
Page created in 0.125 seconds with 28 queries.