Author Topic: How to Measure Crank Tolerance  (Read 26191 times)

0 Members and 1 Guest are viewing this topic.

Offline umberto

  • Administrator
  • Hero Member
  • *****
  • Posts: 2,485
  • First Ride 02-02-19
How to Measure Crank Tolerance
« on: May 16, 2017, 10:25:59 AM »
This is for a Yamaha Blaster, but it would be pretty similar to any two stroke.  Refer to your user's manual for tolerance, but for my 2004 KX250, it is between 0.037 to 0.049 mm or 0.015 to 0.0019 inches.  The total vertical run out should be nor more than 0.03 mm or 0.0012 inches.

My 1988 KX500 lists 0.033 to 0.049 mm (sorry no inches) for side to side movement and the same 0.03 or 0.0012 inches for run out.


https://www.youtube.com/watch?v=8u7A59iCyCU
Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525/2017 KX250F - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144