KX Riders
  Home Help Login Register   *
Welcome, Guest. Please login or register.
Did you miss your activation email?
January 20, 2018, 01:44:49 AM

Login with username, password and session length
[January 19, 2018, 04:36:27 PM]

[January 19, 2018, 01:30:55 PM]

[January 19, 2018, 01:16:31 PM]

[January 18, 2018, 03:34:02 PM]

[January 17, 2018, 05:50:13 PM]

[January 16, 2018, 06:03:30 PM]

[January 15, 2018, 11:43:30 AM]

[January 13, 2018, 03:47:24 AM]

[January 12, 2018, 10:22:28 PM]

[January 12, 2018, 01:58:29 PM]

[January 11, 2018, 10:28:30 PM]

[January 10, 2018, 08:15:10 AM]

[January 08, 2018, 10:31:52 AM]

[January 07, 2018, 08:22:35 AM]

[January 07, 2018, 07:18:18 AM]
Pages: [1]   Go Down
Author Topic: Rerouting the Brake Line on an 03 250  (Read 6696 times)
0 Members and 1 Guest are viewing this topic.
Hero Member
Offline Offline

Joined: 01.14.15
Posts: 1,724

Goliath Returning from Battle

« on: May 01, 2016, 10:18:39 AM »

I decided to do some suspension swapping on a couple of my bikes to get the best equipment on the bikes I have been riding the most.  In the process of doing that swap, I wanted to fix the brake line routing on Goliath to hopefully improve the lever feel.  My 250 and Goliath both have oversized front brake rotors, but the 250 feels so much better at the lever.  The suspension swap will involve the KYB kit suspension that I bought with my KDX Hybrid and it has the same brake line routing as the 03.  I read somewhere that you can use 08 RM 250 two stroke fork guards, which will eliminate the fork guides, and add the standard brake clamp location.  I purchased the guards, Suzuki brake line clamps, and a new 2004 250 Galfer front brake line from Rocky Mountain and proceeded to make the swap.

The first thing I did was notch the brake side fork guard to fit over the previous brake line clamp.  It's pretty easy because it has an indentation where you need to cut.  This is what it looks like on the other side guard:

Just cut up through that with a hacksaw, and then across with a utility knife.  It should look like this when mounted:

You will need to drill out one of the sides that mount on the front to remove the metal inserts or the second bolt won't fit.  Here is the bike with the new forks, and brake line routing.  The brake lever feel is a ton better, and should make the braking process a lot more immediate.

« Last Edit: January 06, 2018, 08:11:44 AM by umberto » Logged

Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525 - Goliath
04 KX 250
04 KX 250 - Lunchbox's Bike
05 KX 125/144
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
TinyPortal v0.9.7 © Bloc
Valid XHTML 1.0! Valid CSS!
Page created in 0.119 seconds with 27 queries.