KX Riders
Maintenance & Technical => KX250 / KX125 => Topic started by: elmo on October 10, 2011, 11:12:59 PM
-
Guys one of the few remaining issues i have with my 91 kx250 is i need a frigging winch to pull the clutch in!
Now does anyone know if i can get lighter springs for the pressure plate bolts? If this will help? or am i barking up the wrong tree completely?
I have an apiceo easy clutch on there but even with that it's like pulling Megan Fox! (extremely difficult for me, an i'm a big lad!)
-
id say to get oem springs and a MSR pro raptor clutch lever thing. and a new cable , and it will be good
-
Also i wanna get some new hubs and rims, do i have to get year specfic hubs or can i use ones from another year... If so does anyone know what ones i'm safe to use?
-
the front hub is the same on these models
Model (10):
KX125-H1 (KX125) (1990)
KX125-H2 (KX125) (1991)
KX125-J1 (KX125) (1992)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
the rear hub
Model (26):
KDX200-E2 (KDX200) (1990)
KDX200-E3 (KDX200) (1991)
KDX200-E4 (KDX200) (1992)
KDX200-E5 (KDX200) (1993)
KDX200-E6 (KDX200) (1994)
KX125-H1 (KX125) (1990)
KX125-H2 (KX125) (1991)
KX125-J1 (KX125) (1992)
KX125-J2 (KX125) (1993)
KX125-K1 (KX125) (1994)
KX125-K2 (KX125) (1995)
KX125-K3 (KX125) (1996)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX250-J2 (KX250) (1993)
KX250-K1 (KX250) (1994)
KX250-K2 (KX250) (1995)
KX250-K3 (KX250) (1996)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
KX500-E6 (KX500) (1994)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)
-
you are a star!