KX Riders
Maintenance & Technical => KX250 / KX125 => Topic started by: andydunne on September 23, 2011, 04:03:20 AM
-
Hey guys, I need new footpeg springs for my 89 KX 125. What other, newer KX bikes share the same part, it would be easier source them then.
Also likewise for a rear sprocket, what other bikes share the same fitment?
-
Im quite sure I have the springs, from an 89 kx250. LMK if needed.
-
Good stuff, are they working fine? Where in the world are you?
I dont know what LMK means sorry
-
Well it looks like I dont have any. But you can still order them,
http://www.ronayers.com/Fiche/TypeID/26/Type/Motorcycle/MakeID/3/Make/Kawasaki/YearID/30/Year/1989/ModelID/3929/Model/KX125/GroupID/121982/Group/Footrests
LMK=let me know
-
Here is what the book says:
92144-1249
Left foot peg spring:
1988 Kawasaki KX500 Footrests SPRING,STEP,LH
1989 Kawasaki KX125 Footrests SPRING,STEP,LH
1989 Kawasaki KX250 Footrests SPRING,STEP,LH
34028-1234
Right foot peg spring:
1988 Kawasaki KX500 Footrests SPRING,STEP,RH
1989 Kawasaki KX125 Footrests SPRING,STEP,RH
1989 Kawasaki KX250 Footrests SPRING,STEP,RH
-
Cheers guys, so the spring is specific to that year? How about the sprocket, any info
-
he has specs for the OLD part number for the springs.. the new part number says it will fit these models
Model (35):
KDX200-H1 (KDX200) (1995)
KDX200-H10 (KDX200) (2004)
KDX200-H11 (KDX200) (2005)
KDX200-H2 (KDX200) (1996)
KDX200-H3 (KDX200) (1997)
KDX200-H4 (KDX200) (1998)
KDX200-H5 (KDX200) (1999)
KDX200-H6 (KDX200) (2000)
KDX200H6F (KDX200) (2006)
KDX200-H7 (KDX200) (2001)
KDX200-H8 (KDX200) (2002)
KDX200-H9 (KDX200) (2003)
KDX220-A10 (KDX220R) (2003)
KDX220-A11 (KDX220R) (2004)
KDX220-A12 (KDX220R) (2005)
KDX220-A4 (KDX220R) (1997)
KDX220-A5 (KDX220R) (1998)
KDX220-A6 (KDX220R) (1999)
KDX220-A7 (KDX220R) (2000)
KDX220-A8 (KDX220R) (2001)
KDX220-A9 (KDX220R) (2002)
KX125-K2 (KX125) (1995)
KX125-K3 (KX125) (1996)
KX250-K2 (KX250) (1995)
KX250-K3 (KX250) (1996)
KX500-E10 (KX500) (1998)
KX500-E11 (KX500) (1999)
KX500-E12 (KX500) (2000)
KX500-E13 (KX500) (2001)
KX500-E14 (KX500) (2002)
KX500-E15 (KX500) (2003)
KX500-E16 (KX500) (2004)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)
KX500-E9 (KX500) (1997)
and for the sprocket, the oem number fits these models
Model (41):
KX125-D1 (KX125) (1985)
KX125-E1 (KX125) (1986)
KX125-E2 (KX125) (1987)
KX125-F1 (KX125) (1988)
KX125-G1 (KX125) (1989)
KX125-H1 (KX125) (1990)
KX125-H2 (KX125) (1991)
KX125-J1 (KX125) (1992)
KX125-J2 (KX125) (1993)
KX125-K1 (KX125) (1994)
KX125-K2 (KX125) (1995)
KX250-D2 (KX250) (1986)
KX250-E1 (KX250) (1987)
KX250-F1 (KX250) (1988)
KX250-G1 (KX250) (1989)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX250-J2 (KX250) (1993)
KX250-K1 (KX250) (1994)
KX250-K2 (KX250) (1995)
KX500-B1 (KX500) (1985)
KX500-B2 (KX500) (1986)
KX500-C1 (KX500) (1987)
KX500-D1 (KX500) (1988)
KX500-E1 (KX500) (1989)
KX500-E10 (KX500) (1998)
KX500-E11 (KX500) (1999)
KX500-E12 (KX500) (2000)
KX500-E13 (KX500) (2001)
KX500-E14 (KX500) (2002)
KX500-E15 (KX500) (2003)
KX500-E16 (KX500) (2004)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
KX500-E6 (KX500) (1994)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)
KX500-E9 (KX500) (1997)
-
Spot on thanks lad, that hits the nail on the head :-)
-
FITS 88-04 KX500, 88-96 KX125 KX250, 91, 93-94 KDX250, 95-05 KDX200, 97-05 KDX220
Sorry, the number was outdated.
-
I got the footpeg springs, I ended up ordering them from a Kawasaki dealer, twas only 10euro all in. I also ordered a used 51 toooth sprocket off ebay, it was cheap too. I have a 48 tooth atm but wanted a bigger one for the craic, after driving my friends ktm with a big rear sprocket, it had much more torque and snap