KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: tschisi on June 23, 2011, 08:18:27 AM

Title: kx125: 03 and 04/05 differences
Post by: tschisi on June 23, 2011, 08:18:27 AM

Hi!

I just wonder about what could be the differences between the frames of the 03 kx125 and the 04/05 models.
The trailtech kickstand kits are supposed to fit only the 04/05 frame.
I can?t see any differences?!

Title: Re: kx125: 03 and 04/05 differences
Post by: tschisi on July 23, 2011, 05:52:12 AM

I now got a 04 (same as i have owned two years ago).  :-)

I know this sucks but would you please confirm if these are the stock settings:
main: 420
pilot: 40
clip: 3rd
screw: 2 turns

Title: Re: kx125: 03 and 04/05 differences
Post by: Friar-Tuck on July 23, 2011, 08:01:04 AM

 Hello T,
  This is the Team Green 2004 settings 
Recommended for sea level to 3,000 feet above sea level.


                           STOCK
KX 125M-2 Stock   Main jet 420            Team Green  410
 Pilot                                40                            37.5
 Air Screw                        1 1/2          Same   
Needle and clip     6CHJ10-82 #3           Same
Slide                                5.575         Same
 Plug BR9EIX

Gearing is 13/51

 Note:  CAUTION: Team Green specifications are obtained using 92 Octane pump fuel mixed at a 40: I mix ratio.

Title: Re: kx125: 03 and 04/05 differences
Post by: tschisi on July 23, 2011, 07:35:32 PM

Alright, i remember my last kx125 running good with stock settings but a 35 pilot...

Ignition timing:
I?ve got three notches on the case to align the stator plate with.
I guess it should align with the center notch when stock?!

How can i figure out if my clutch springs are stock?
I?ve got rather heavy pull...