KX Riders

Maintenance & Technical => KX500 Original => Topic started by: Roostmad1 on August 15, 2010, 08:29:22 AM

Title: KX500/250 clutch interchange
Post by: Roostmad1 on August 15, 2010, 08:29:22 AM
can anybody please tell me what other years clutch basket will fit my 88 KX250,i know the 86 KX500 clutch plates are all the same just don't know about the clutch basket,should of snatched up that low hour basket on ebay but mucked around and missed out!!thanks everyone
Title: Re: KX500/250 clutch interchange
Post by: Friar-Tuck on August 15, 2010, 08:32:17 AM
 Hey Roost,
What I do is look up the part # and then there is a tab in one of the windows at Kawasaki.com that tells you all the different modles that part # calls for.
   Please stand by... '88 Kx 250 clutch basket...
  Tuck\o/

This should be the link to the parts diagram:
 https://www.kawasakiepc.com/SystemSearch_Frames.cfm?QuickSearch=1&SearchFor=KX250-F1&SearchBy=Model&cGroupID=&CFID=4683766&CFTOKEN=65660191

Here are the 6 modles the clutch basket fit according to what I could find:
  part #13095-1171  Description:  HOUSING-COMP-CLUTCH
Model (6):   
KDX250-D1 (KDX250) (1991)
KDX250-D2 (KDX250) (1992)
KDX250-D3 (KDX250) (1993)
KDX250-D4 (KDX250) (1994)
KX250-F1 (KX250) (1988)
KX250-G1 (KX250) (1989)
Title: Re: KX500/250 clutch interchange
Post by: Roostmad1 on August 15, 2010, 09:01:07 AM
Quote from: Friar-Tuck on August 15, 2010, 08:32:17 AM
Hey Roost,
What I do is look up the part # and then there is a tab in one of the windows at Kawasaki.com that tells you all the different modles that part # calls for.
   Please stand by... '88 Kx 250 clutch basket...
  Tuck\o/

This should be the link to the parts diagram:
 https://www.kawasakiepc.com/SystemSearch_Frames.cfm?QuickSearch=1&SearchFor=KX250-F1&SearchBy=Model&cGroupID=&CFID=4683766&CFTOKEN=65660191

Here are the 6 modles the clutch basket fit according to what I could find:
  part #13095-1171  Description:  HOUSING-COMP-CLUTCH
Model (6):   
KDX250-D1 (KDX250) (1991)
KDX250-D2 (KDX250) (1992)
KDX250-D3 (KDX250) (1993)
KDX250-D4 (KDX250) (1994)
KX250-F1 (KX250) (1988)
KX250-G1 (KX250) (1989)     hi Friar,thanks again mate really appreicated,cheers Richard
Title: Re: KX500/250 clutch interchange
Post by: Friar-Tuck on August 15, 2010, 09:15:54 AM
  I think the terminology is,
  No worries Mate,
Glad to be of service.  The funny thing is the plates and fibers fit 29 different bikes, the pressure plate fits 8 and
the inner hub fits like 6... you just happen to need the part that only fits the kx250's
  \o/
Title: Re: KX500/250 clutch interchange
Post by: sandblaster on September 13, 2010, 02:20:29 PM
My info says: 88-89 KX250, 91-94 KDX250