KX Riders

Maintenance & Technical => KX100 / KX85 / KX80 / KX65 / KX60 => Topic started by: hughes on July 28, 2010, 03:31:44 AM

Title: Need Help Please.
Post by: hughes on July 28, 2010, 03:31:44 AM

Hey Guy's

Sorry for such a rush on information but I'm just trying to get this bike back together for my boy to ride this weekend.

Here's what I need. It's a 2003 Kawasaki KX65, I was replaceing the shock bumper/changing fluid etc. I alway run a tie strap through the piston and shim stack but one shim fell out of place and I can't figure out where in the shim stack it goes. Does anybody have a photo / diagram of the stock shim stack? Any information would be great thanks.

Title: Re: Need Help Please.
Post by: Coop on July 28, 2010, 05:44:09 AM

PM me your email address. I'm not sure I have what you need as the diagrams I have don't go in depth on disassembly of the shock as far as you took it. But it may help a little.

Title: Re: Need Help Please.
Post by: hughes on July 28, 2010, 08:17:31 AM

Coop,

Thanks for the help but I got some answers from Powerband Racing as follows. http://powerbandracing.com (http://powerbandracing.com) also http://www.mx-tech.com/ (http://www.mx-tech.com/) provided the same information.
     
 NUT   

       19 x .50

       13 x .30

(9) 21 x .20

(2) 21 x .15

      13 x .10

PISTON

(2) 29 X .20

       11 X .20

(8 ) 29 X .20

(2) 16.4 X 20

(4) 29 X .30

 

Stock Valve Stack