KX Riders

Maintenance & Technical => KX500 Original => Topic started by: jdb1989 on November 06, 2009, 02:18:32 PM

Title: i need to know the thread pitch on the flywheel center bolt
Post by: jdb1989 on November 06, 2009, 02:18:32 PM

i sheared the bolt and i need to know the pitch i know its a 12.anything will help thanks

Title: Re: i need to know the thread pitch on the flywheel center bolt
Post by: Friar-Tuck on November 06, 2009, 05:40:57 PM

  Does this look like the critter ?  1989 KX500 (KX500-E1)

http://www.xtremeusa.com/fiche_section_detail.asp?section=381744&category=Motorcycles&make=KAWASAKI&year=1989&fveh=8824

  (when you open the window, move the blue dot to the left and shrink the view, the crank will come into view)
       NUT-12MM     92015-1156
   
http://www.xtremeusa.com/fiche_section_detail.asp?section=381771&category=Motorcycles&make=KAWASAKI&year=1989&fveh=8824

            Are you saying the end of the crank sheared off with the nut?
 Tuck\o/

  Doohhh!!!  Link Repaired My Apologies!

Title: Re: i need to know the thread pitch on the flywheel center bolt
Post by: RoostDaddy on November 07, 2009, 12:47:41 AM

Tuck, thats for an EX500.

JDB you are correct its a 12mm, and i believe its 1.25 thread.  (as I assume you are talking the flanged nut)

Title: Re: i need to know the thread pitch on the flywheel center bolt
Post by: dave916 on November 07, 2009, 08:14:44 AM

there is no bolt there to shear , just the crankshaft and 12m nut that could strip the treads,  sayin that i have seen the nut welded to crank when the treads had been damaged