KX Riders

General => Riding Stories => Topic started by: doordie on January 20, 2009, 06:04:49 AM

Title: Iceroad traning
Post by: doordie on January 20, 2009, 06:04:49 AM

Here?s some pic?s from lastwekend practice.
My shock explode after a few laps though.... :cry:

Title: Re: Iceroad traning
Post by: 1CrazedKawi on January 20, 2009, 11:00:54 AM

I really like that last photo! 8-) Nice Action Shot!

I got cold just looking at them. Thanks for sharing! Really good pics! :-)

Title: Re: Iceroad traning
Post by: GDubb on January 20, 2009, 07:20:37 PM

I really dig those graphics doordie. I dont think I have ever seen them before and I like 'em.  8-)


-G

Title: Re: Iceroad traning
Post by: Good on January 21, 2009, 02:25:54 AM

Great shots, what's the guy behind you riding in the last pic?

Title: Re: Iceroad traning
Post by: doordie on January 23, 2009, 03:26:09 AM

Quote from: Good on January 21, 2009, 02:25:54 AM

Great shots, what's the guy behind you riding in the last pic?

I think it was a H...da CR500...but the 4-wheeler were a modified GasGas ATW with a Ducati 748cc engine,runs as hell with 100hp+ :evil:

Title: Re: Iceroad traning
Post by: newp500 on January 23, 2009, 07:31:15 AM

Hey Doordie,

What do you run for studs? We are allowed to use only screws with a single screw slot and a maximum head height of 3/16. I also see you didn't have raps on the tires at your van. I allways have raps on if they are off the ice to save the stud. Do you stud your own tires? Sorry for all the ?'s  I love the people who see a old school 5 pull away from the 450's with no problems. Thanks

-Rob

Title: Re: Iceroad traning
Post by: havoc raceing on January 23, 2009, 04:23:39 PM

you got a good person behind the camera :-)

Title: Re: Iceroad traning
Post by: doordie on February 02, 2009, 06:20:18 AM

Last weekend practice.... :evil:

Title: Re: Iceroad traning
Post by: doordie on February 02, 2009, 06:46:41 AM

Quote from: newp500 on January 23, 2009, 07:31:15 AM

Hey Doordie,

What do you run for studs? We are allowed to use only screws with a single screw slot and a maximum head height of 3/16. I also see you didn't have raps on the tires at your van. I allways have raps on if they are off the ice to save the stud. Do you stud your own tires? Sorry for all the ?'s  I love the people who see a old school 5 pull away from the 450's with no problems. Thanks

-Rob

I run standard endurostuds minimum 2.2mm dia,(total amount of 350 front) and 2.5mm dia,(total amount 350 rear)

Title: Re: Iceroad traning
Post by: GDubb on February 02, 2009, 06:55:54 PM

I wanna play!  :evil: :-D


-G

Title: Re: Iceroad traning
Post by: newp500 on February 06, 2009, 03:41:21 AM

Here is the studs we are limited too and the pattern that I use for road racing. I may have to stud up a pair like yours to play with.