KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: maverick on June 30, 2008, 01:35:03 PM

Title: How to tell between a 125 and 250 frame?
Post by: maverick on June 30, 2008, 01:35:03 PM

I have 1993 kx 125 motor but im not sure if the frame is from a 125. It may be a 250, is there anyway I can tell for sure from the vin or somethin?

thanks chris

Title: Re: How to tell between a 125 and 250 frame?
Post by: kayx250 on June 30, 2008, 02:02:50 PM

the frames are identical.  :wink:

Title: Re: How to tell between a 125 and 250 frame?
Post by: BDI on June 30, 2008, 03:28:22 PM

Quote from: kayx250 on June 30, 2008, 02:02:50 PM

the frames are identical.  :wink:

Are you sure because on the newer stuff they are different. You can't even interchange the engines between the two.

Title: Re: How to tell between a 125 and 250 frame?
Post by: maverick on June 30, 2008, 03:46:04 PM

so the frames and size are the same, but the motors are the only difference?

Title: Re: How to tell between a 125 and 250 frame?
Post by: don46 on June 30, 2008, 03:58:53 PM

The frames are NOT Identical, they have a different part number. Typically the 125 frame downtubes are pulled back more than a 250. The motors won't bolt right in either.

Quote from: kayx250 on June 30, 2008, 02:02:50 PM

the frames are identical.  :wink:

Where did you get this information? is it what you think or what?

Title: Re: How to tell between a 125 and 250 frame?
Post by: kayx250 on July 01, 2008, 12:54:18 PM

Quote from: don46 on June 30, 2008, 03:58:53 PM

The frames are NOT Identical, they have a different part number. Typically the 125 frame downtubes are pulled back more than a 250. The motors won't bolt right in either.

Quote from: kayx250 on June 30, 2008, 02:02:50 PM

the frames are identical.  :wink:

Where did you get this information? is it what you think or what?

Kawasakis website...unless kawasaki is wrong....... :? The part numbers are identical.....

for 1993 kx125 or kx250 part # 32160A

Title: Re: How to tell between a 125 and 250 frame?
Post by: kayx250 on July 01, 2008, 01:04:35 PM

Quote from: kayx250 on July 01, 2008, 12:54:18 PM

Quote from: don46 on June 30, 2008, 03:58:53 PM

The frames are NOT Identical, they have a different part number. Typically the 125 frame downtubes are pulled back more than a 250. The motors won't bolt right in either.

Quote from: kayx250 on June 30, 2008, 02:02:50 PM

the frames are identical.  :wink:

Where did you get this information? is it what you think or what?

Kawasakis website...unless kawasaki is wrong....... :? The part numbers are identical.....

for 1993 kx125 or kx250 part # 32160A

I looked more into it kawasakis website is somewhat misleading....ALL there 125/250 frames say 32160A and I know that isnt right because when I swapped in my 05 engine in my 03 frame it sure as heck didnt fit...

Title: Re: How to tell between a 125 and 250 frame?
Post by: jc7622 on July 02, 2008, 02:10:43 AM

I don't know about the 1993, but on the newer bikes made in the last 10 years the frames are not the same.  The number "32160A" is not the complete part number.  If you look further down the parts diagram page on kawasaki.com there will be an additional four digits that is specific to a particular bike.

Some areas of the frames are the same and some areas of them are different.  The lower part of the frame and the cradle are different.  The upper part of the frame and sub-frame are the same.  With the exception of the engine, nearly all of the other parts on a 125 and 250 of a particular year/style (99-02, 03-?, etc) are the same and will bolt on to either frame.