KX Riders
Maintenance & Technical => KX500 Original => Topic started by: peppe70rs on February 25, 2008, 10:20:28 PM
-
Good to all.
A question: but in the pictures and the valve is open or closed?
Thanks....
Forgive me if I am short, unfortunately I do not know any way the English....I go forward with online translator
(http://i37.photobucket.com/albums/e75/smanett/valve.jpg)
-
the pic is made through the exhaustport i guess?
if so is that liquid gasket around the outerport?
it s a closed valve i would think ,
what is the issue here, valve got stuc in place or ??
-
Fully open tuned oval exhaustport and welded KIPS-flap. :|
BUT take a better photo and we can answer more sure! :wink:
Lower piston so we can see better...hmm...something wrong with
rods,seems closed :?
-
grazie delle risposte ragazzi :-)
domani faccio qualche foto migliore.
GRAZIEEEEEEEEEEEEEEEE
-
ciao gracias bella di motore :lol:
on kx riders is a guy from italy
davidvak is the nick :mrgreen:
he maybe can translate for you
i can t read this italien :?
-
Unfortunately, a better picture closely can'tI it is not detailed.
However, the photo above was made after the cylinder (photo below).
Question: but if ever leave the valve open, which would have disadvantages in terms of delivery?
In short, my motion takes off not to 4th and 5th.
The ratio is 14-44 and 120-160 with 17 rubbers.
(http://i37.photobucket.com/albums/e75/smanett/02022008023.jpg)
My motion is transformed motard.
I also have my video to show that in my opinion, the motion should not be more than ......... But I did on the street but public campaign.
If not create problems can get a link to my video!!!
This is my monster
(http://i37.photobucket.com/albums/e75/smanett/25112007.jpg)
PS I sent a token to davidvak
-
nice ride peppe 8-)
91 kx250 /500 conversion it is?
for the issue i can asume your bike doesn,t ride full out in 4th/5th?
my ratio is 14/42 at my race sm
the other has 15/44 for the road
almost simular but with diff.caracter
but if the valve doesnt apply you must notice that in every gear always
not 4/5 only :?
-
Unfortunately still unable to understand your answers :x ..... I am very sad for this :roll:
Question: but you can get up with the high-speed transmission?
PS I can send you the link of the video, maybe you can understand better how the bike goes: What do you think?
I can also send in private so as not to break the rules!!
Tell me about my friend/s....
-
you have pm
i sure hope to see the vid :-)
-
You have a private message.
I look forward to knowing your advice :-D
-
When a cylinder/barell is ported like that the KIPS-flap is useless and you
put out pins and weld it to attach it to fully open all time in rpm-range.
BUT valverods should move as usually after rpm.
You loose a little bottom power but win at top power with better flow and more
exhaustport area.
-
ciao doordie..........
So my problem that the bike does not respond to nervous 4th and 5th fault might be that the valve being open not always the right Power to the middle?
PS I would like to know if you have seen the video. I also would like to hear your opinion.
If there are problems we will send you ....... if you have not already done so kx500freak :wink:
-
Hello doordie, did you by chance seen the video?
Questions: Question: some of you can kindly send me the manual workshop? I will try to open your head and check valve
I would be really happy :-) :-) :-)
Through endless :wink:
-
http://it.youtube.com/watch?v=x1cgjnkeVIA
http://it.youtube.com/watch?v=8IHIxfvhZNI
here are your vids for doordie to watch
best to wait for him before doing anything to bike :mrgreen:
ciao friend!! :-)
-
Hello beautiful ..... I did not put directly link to the video because I was afraid to break the rules of the forum, just for this reason :oops:
Ok expect doordie :wink:
For the workshop manual? There is some hope that we can have?
I am very curious to find out in detail my motorcycle :-D
Hello amico :-)
-
as long as it,s not spam or sales..
or illegal or dirty , :-o
posting movies isn,t breaking any rule
their your own recordings of your ride so nothings wrong puttin,them here
wait for doordie we do :-)
-
Posting a link is no problem. Posting KX related pictures is fine. Anything else should be posted on "You Tube" or "Photo Bucket" and a link can be posted. Copy right material is a big problem. POST NO COPY RIGHT MATERIAL UNLESS YOU OWN THE COPY RIGHT!!! No shop manuals or shop manual pages. I can't be more clear on this subject. If someone sues KXRiders it comes back on me. Thanks for understanding.
Danger4u2 aka David J.
-
that,s why i didn,t put up manual pages here
but the link for his movies does no harm correct :wink:
i luv kxriders so never would do anything against its rules
-
The rules were here when I took over from the previous owner (Alan and before that it was Paul), the rules worked for them. I have the mind set that "If it's not broken no need to fix anything". No problem with movie/video links. I enjoy watching those links. You find the cool video's, post the link and we will watch them.
-
Greet and thank the Administrator for his intervention. :-)
I understand only one thing: that the link to my video is not illegal ..... I did not understand anything about the workshop manual. :oops:
In practice it is not possible to have?
Even in PM?
A big greeting!!!!!
-
http://it.youtube.com/watch?v=x1cgjnkeVIA
http://it.youtube.com/watch?v=8IHIxfvhZNI
here are your vids for doordie to watch
best to wait for him before doing anything to bike :mrgreen:
ciao friend!! :-)
You have to re-jet,very much sputtering(overclosing valverod) and low performance at lowrange,seems good midrange,look at sparkplug and see what colour you have. :|
KIPS pullrod should move when you rewing engine if it doesn`t you have problem. :-(
Look at my video for a "well" jetted engine:
http://it.youtube.com/watch?v=oBISuok4OQY
-
show for my ears as soon as :-o I am able (very soon) I make a small video with the same procedure.......then you give me your judgment. :wink:
For the manual shop still nothing?
hi head
-
you are smart guy :-)
make same kind of vid as doordie,
he can judge then perfect
but for the manual :?
isn,t there any on Ebay ,
here in holland we have marketplace
sometimes it comes by on there
-
Ok freak......today I have not been able to make any video because there has been bad time, I hope for morning tomorrow there is the sun 8-).
However the motorbike of doordie I wanted to see her/it in movement!!! :mrgreen:
For the manual I try to see on ebay!!!
-
good plan peppe! 8-)
i sure like the sound of both doordie,s and your,s :-)
my racebike sounds similar
the other is little rich jetted for roaduse
sounds good too but has streetpipe
-
forgive me freak: but does doordie have qul video online only? :-D
-
forgive me freak: but does doordie have qul video online only? :-D
you mean full video peppe?
or more vids ?
anyway i have this movie from wilhemtell
awesome vid you,ll see
put the stereo on max and enjoy this ride :-o
http://www.youtube.com/watch?v=UcYyl5OKpWY
-
I intended video on road......no with the firm motorbike.
There is today here a beautiful sun, but it throws a strong wind. :x
My stereo is at the most always when I listen to the monster :-D
-
hi to everybody......what do you say of it?
http://it.youtube.com/watch?v=i9h2Y0VCRkw
-
Thanks very kind :roll:
-
Seems to run better than mine! :-D
-
I did not understand if it is a joke or talk seriously :oops:
Anyway thanks for response :-D
-
Serious! It runs a LOT better than mine! Not kidding at all.
-
Even your worst, be mine?
We believe :roll:
You have a video of your beast? :-D