KX Riders
Maintenance & Technical => KX500 Original => Topic started by: aussiexxx on October 29, 2007, 02:48:15 PM
-
Will the 500B fit straight into the frame of a 500E ? I want to build a dirt drag bike with NOS but do not want to destroy my good 500E motor and I have a chance to pick up a good 500B motor.
-
It's been awhile since I messed with the B motor, the holes for the motor mounts are positioned the same, as I recall 1 or maybe both of the front mounts are narrower, but could be shimmed to fit. The head is different, the head stay is shorter on the b than the E, but then the head is bigger as well so the upper head mount may work. Bottom line it will go in with minimal mods (shims and maybe different upper head brackets).
Having said all this, you may want to reconsider putting NOS to it, the clutch isn't as strong as the newer bikes, they only use 5 clutch springs, hmm maybe you could get stiffer springs.
-
:wink:˙ʇʇoɔs spɹɐƃǝɹ
˙sɯnɹoɟ xʞ ǝɥʇ oʇuo ǝɯoɔlǝʍ puɐ ollǝɥ ʎɐs oʇ pǝʇuɐʍ ʇsnɾ ı 'uoıʇou ʇsǝıƃƃoɟ ǝɥʇ ǝʌɐɥ ʇ,uop ı 'ʎɹɹos
-
:wink:˙ʇʇoɔs spɹɐƃǝɹ
˙sɯnɹoɟ xʞ ǝɥʇ oʇuo ǝɯoɔlǝʍ puɐ ollǝɥ ʎɐs oʇ pǝʇuɐʍ ʇsnɾ ı 'uoıʇou ʇsǝıƃƃoɟ ǝɥʇ ǝʌɐɥ ʇ,uop ı 'ʎɹɹos
What the H-ll is that?
-
:wink:˙ʇʇoɔs spɹɐƃǝɹ
˙sɯnɹoɟ xʞ ǝɥʇ oʇuo ǝɯoɔlǝʍ puɐ ollǝɥ ʎɐs oʇ pǝʇuɐʍ ʇsnɾ ı 'uoıʇou ʇsǝıƃƃoɟ ǝɥʇ ǝʌɐɥ ʇ,uop ı 'ʎɹɹos
What the H-ll is that?
Just me welcoming out new Australian member into the forums using FLIP (http://www.revfad.com/flip.html).
Its about the first time I have had a chance to use it :lol:
Regards Scott.