KX Riders
Maintenance & Technical => KX500 Original => Topic started by: doordie on August 29, 2007, 10:22:08 PM
-
What about these rings,have you tried them Steward or anyone who use Lectron? :|
-
not enough room on the bike to fit and i thought they were for more a 4 stroke set up to change velocty thru carb
-
For me isn?t no problem with room, I will use KN-filters mounted directly on carb.
Get higher velocity is a good thing regardless of 2-stroke or 4-stroke isn?t it? :-D
I?m trying to test my Lectron next week,waiting for right needle though (4-2 XL),and see this ring at a website,maybe worth testing too. :|
-
i have a 4.5" ring on a 41.5mm mikuni. and a nice intake manifold.
-
4-2xl.careful hero.thats gonna be lean compared to your old one(7-1). :-)
-
4-2xl.careful hero.thats gonna be lean compared to your old one(7-1). :-)
Ops!
That needle runs Steward with same ported barell and piston,but I got DOMA-pipe though.
Maybe to lean? :|
Fast by Gast recomend 7-1 needle for KX500 and now I?m unsure witch one I should pick
to start with :?
What do you think Steward? 8-)
-
4.2 xl needle at around 2.010 long with 1 to 1.5 turns on power jet at 1000 feet elevtion with 50.1 hr1 belray and vp cmp at 15 to 1 comp may take some adjusting with diffrent set up
-
how do you guys bolt up a 44mm lectron to the intake manifold.
-
just lube it and it goes right on
-
was the 4-2xl needle a packard needle or fast by gast one?
-
packerd .......there is a diffrence
-
bolt one of these carbs.
-
packerd .......there is a diffrence
What?s diffrence? :-o
-
they say the tapers are diffrent on needles from diffrent manufacters even vary needle to needle
-
Now you confusing me more then ever? :-D
The dealer is Packardracing,yeah?
Needles manufactures in different ways and mades
slighly different,I?m right? :|
I saw in packardracings website they fabricate Lectron needle in CNC-machines. :wink:
The Lectronrings adds +6cfm in velocity! :evil:
-
just telling you the truth not to confuss you but so you relize not all needles the same slight diffrence
-
Thx Stewart,I appricied every tips I can get! 8-)
We will see how the Lectron runs when I got needle! :evil:
-
i've had good results with 6-1 and 6-2 fast by gast needles.tried 5-2 but was a little lean for my setup.true the packard needles are different as he cuts his own taper.
-
this works like the lectron rings,but better.
-
Kaw,
Is that a Kehin PWK with a power jet setup? Please explain the mods. Thanks. cam.
-
What about these rings,have you tried them Steward or anyone who use Lectron? :|
how much power do you get from that seethru bowl. :evil: :-D
-
it's a good tuning tool.