KX Riders

Maintenance & Technical => KX500 Original => Topic started by: JP on July 07, 2007, 08:46:38 AM

Title: 250/500 conversion
Post by: JP on July 07, 2007, 08:46:38 AM

Starting the project of putting 98 500 motor into 04 250. Any tips would be appreciated. Only concern I have really is with the exhaust. Was thinking of getting a cone pipe made up but the guy I had in mind is no longer doing it. I've heard of guys using cr500 pipes. Your thoughts.

Title: Re: 250/500 conversion
Post by: alan on July 07, 2007, 08:54:49 AM

JP, you should do some searches on the site, because there has been lots of info go through here on that topic.

Alan :-D :-D

Ck this out http://www.kxriders.com/forums/index.php?action=search2

Just put 250/500 in the search block.

Title: Re: 250/500 conversion
Post by: BDI on July 08, 2007, 05:59:27 AM

I am In the middle of building some pipes for this swap.