KX Riders

Maintenance & Technical => KX500 Original => Topic started by: c-152 on May 19, 2007, 12:49:46 AM

Title: Cant get free play in my clutch
Post by: c-152 on May 19, 2007, 12:49:46 AM

I replaced my clutch cable this a little while ago and cant get enough free play.  I did a search and found some info but still am not sure.  Could worn bearings or clutch arm?  Anyone have any ideas.

Title: Re: Cant get free play in my clutch
Post by: jigggawatt on May 19, 2007, 01:36:53 AM

Is the clutch worn, if so it will take away free play. I had a new clutch and cable and had the same problem. I took everything apart to make sure it was ok . Everything I measured was correct. So I pulled the clutch push rod out and took a few thousands off the rod . It work well and everything works perfect. One of the dirt bike mags had a article the next week telling someone to do the same thing. It made me feel better. Make sure your clutch is in good shape first.

Title: Re: Cant get free play in my clutch
Post by: c-152 on May 20, 2007, 01:56:22 PM

I will do that - thanks for the advice - I had thought the clutch was in good shape but after riding this weekend I noticed is slipping.  It ran great in the tight stuff and did notice any slippage until the trail opened up and we got on it.  I will check it out.  Thanks - I will look into the push rod.