KX Riders
Maintenance & Technical => KX500 Original => Topic started by: kawish on May 02, 2007, 02:08:39 AM
-
i guy,
i want to know if a 1994 pair of fork will fit on my 2001.
thank you
-
I think they are a different dia. I have a 2001 and a 1994. Do you like the color, is that why you want to switch? I suppose you could maybe use some spacers or you would have to change triple tree's.
Alan
-
I believe they were 43 mm up until 95 or something then switched to 46 mm. You could possibly utilize the entire steering assembly.
-
Yes I think you could although the main pivot may also be a different size. I think it would be a down grade as far as handling goes. Why are you looking at doing that?
-
because in one of my fork, the rod en where the cap screw is stripped, i bolted the cap with red loctite, i maybe have
30 ride since this, but i don't like that.......... i see 94 fork on ebay today.
-
Kawish,
If it is a 43mm Kayaba, which I am pretty sure it is, I have a spare 43mm Kayaba off of a 93 YZ125. I bought them on Ebay for the exact same reason as you for my 96 WR250 and I actually used the fork cap off of a friends 95 KX500 until I found that set of forks on Ebay. The plastic guides and several other components are different but the fork cap works. Would you like to buy it off me for like 20 bucks with shipping? That cap is like 70-90 depending on the vendor.
-
thank you but its not the cap that is stripped is the rod, i already change the cap.........
-
That's odd. It must have come off the cap and smashed around inside the fork because there is no way a steel rod is going to get stripped by an aluminum cap. Plus I just realized you have 2001 so it would not have worked. Sorry about that.