KX Riders
General => In General... => Topic started by: maddoggy on April 20, 2007, 10:36:50 AM
-
looking at a 18" wheel. the guy selling it says it is from a 87 k5. however it does not have drum brakes, it has a disk. the disk would mean its at least 88' right??? I really need an 18 for my 91 k5 and i'm hopin i have a winner here. any knowledge from you that are in the know? thanks, MADDOGGY
-
well, if it has the disc, it sounds like the one your lookin for.
may the force be with you!
-
am i right to assume that because it has a disk style brake on that 87 wheel that it would fit my 91 k5? :? yes, i know what happens when i assume. :-D
-
look on some sites to find the year range for the bearings and that should give you your answer.
-
bearing range is from 86-96 and the bearing changes from 97-04. im still not convinced that the hub will be the same as far as disk offset etc...
-
The rear disc was first used on the 86 KXs. I did use a 18 inch rear wheel from my 88 K5 on my 90 KX 250. I swapped the spacers, otherwise the hubs were the same. Not sure about the 87 though.
-
for 150 you can build a pro-wheel if you got the hub.
www.rockymountainatv.com
-
I currently run a 19" :oops:(p.o.s. came on the bike) that I will end up running only paddles on. tryin' to get an 18" somehow to run knobbies on.(IRC M5B) :wink: I may have to buy a junk 19" to scavange a hub out of and ,do as you said ,and build my own. I do love the look of a black rim :-D :-D thanks for the replies madkaw. how about it guys? will that 87' 18"er fit on my 91'k5?
-
do you just like the 18 better? and if so why?
-
the 19" wheel limits you more. there are less tire options that will fit the 19. far more tire options with a 18" rear wheel.as i said before I really like the IRC m5b tire and it's not available for 19" wheels. the 18 also gives you a little more room in the swingarm. my 19 already rubs the airbox flap sometimes with new chain front adj. notch. my flap is now paper thin on the edges. :cry: time to order up$$$.
-
mmmkay...sorry to hear about your flap man, thats horrible...did find that tire in a 19" though
http://www.rockymountainatv.com/productDetail.do
-
so i took a chance and bought this wheel a couple years ago. 87 k5 wheel 18". been in my garage since purchase due to pure laziness, anyways i checked the fitment yesterday only to find that the hub is around 19/32" wider than the 88-96 hubs. i tossed around the idea of machining new spacers but after thorough measurements and checks, it just won't work. the spacing and offsets for disc and sprocket are all wrong. i decided to post this info in case anyone was considering doing the same thing.
MADDOGGY
-
Thanks for the info maddoggy I am looking for a spare 18 to run a paddle I got for free that is basically new.