KX Riders

Maintenance & Technical => KX500 Original => Topic started by: cooltoy on July 13, 2003, 03:35:37 AM

Title: water pump seal
Post by: cooltoy on July 13, 2003, 03:35:37 AM

Hello,I am trying to change my water pump seal on my 1987 kx500.I have pulled the clutch cover but i cant get the water pump shaft and bearings out.I got the seal on the outside to come out but is there another seal that needs to be replaced on the inside?

Title: water pump seal
Post by: Hogwylde on July 15, 2003, 06:20:07 AM

I've done this repair on my 93 and ASSUMING that things are the same with yours, there is only one seal.  It's towards the outside (impeller) of the shaft.  Also check the bearings.  If they are loose, you are only going to end up replacing that seal again real soon.  Also check the gear on the end of the shaft for missing/damaged teeth.  Check the drive gear on the end of the crank for the same.  If that gear needs replacing, you are in for some REAL fun!!

Title: Knowledge is King...
Post by: John on July 15, 2003, 08:42:27 AM

Chek out the Kawasaki URL under Web Links. You should be able to find the information there.

/John