KX Riders

Maintenance & Technical => KX500 Original => Topic started by: rotarymonster on May 15, 2006, 06:19:29 PM

Title: kx500 wiring diagram (channel 4 scrapheap challenge)
Post by: rotarymonster on May 15, 2006, 06:19:29 PM

Hi, i am building a machine for scrappy roadshow using kx500, can't get a spark, does anyone have a wiring diagram please? can't find one on net anywhere. i have 2 sets of stators, coils, cdi's, no luck.

Title: Re: kx500 wiring diagram (channel 4 scrapheap challenge)
Post by: rotarymonster on May 15, 2006, 06:20:31 PM

oops, pc crashed, didn't realised it posted ok 1st time!

Title: Re: kx500 wiring diagram (channel 4 scrapheap challenge)
Post by: Timbowe on May 15, 2006, 06:34:08 PM

http://www.kxriders.com/forums/index.php/topic,2234.0.html

Try this?

Title: Re: kx500 wiring diagram (channel 4 scrapheap challenge)
Post by: Danger4u2 on May 16, 2006, 01:16:45 AM

I will put information on this page.

http://www.kxriders.com/forums/index.php/topic,2234.0.html

Danger

Title: Re: kx500 wiring diagram (channel 4 scrapheap challenge)
Post by: rotarymonster on May 16, 2006, 06:17:56 AM

Fantastic, cheers guys. i can even see now if one of the cdis is a different year by wiring config.  :-D.

got a spark! it turned out that one stator colour was different for year (black/red instead of black/white) but matched the one on the cdi, but b/r was not supposed to be connected to b/r (it was additional to the diagram?) so connected the black/red to black/ white from stator and black to coil and works now. show should go out in September'ish.