KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: darvo on October 18, 2018, 10:15:32 AM

Title: Kx Hybrid Stator Questions
Post by: darvo on October 18, 2018, 10:15:32 AM

Hey guys,

I'm currently building a 99 Kx/"Kdx" hybrid and as of now have a stator problem. The engine cases are 1993 Kx 250 and I have a bad stator, I bought all 99 wiring,cdi,coil and stator but the 99 stator doesnt bolt on the 1993 cases.

I've seen that the 93-97 stators look a lot alike on eBay but part numbers on the Oem Schematic are different. Do you guys know if any of the 94-97 stators bolt up to the 93 cases?

Also is there any Kx250 model year guides that describe the different model year characteristics in terms of power delivery?

Thanks

Title: Re: Kx Hybrid Stator Questions
Post by: Kawafornication on October 18, 2018, 01:21:55 PM

Not sure about the 93 250, I have not read it in a while but know that Eric Gorr mentioned changing the CDI on the early 90's 125, another thing was adding a flywheel weight on 250's! Have a read (Y)

https://www.eric-gorr.com/files/pdfs/model_tuning_tips_kawasaki.pdf

Title: Re: Kx Hybrid Stator Questions
Post by: sandblaster on October 19, 2018, 02:50:33 AM

I would mod the stator plate until it did fit....