KX Riders
Maintenance & Technical => KX500 Original => Topic started by: braggcreekdean on April 02, 2018, 09:59:44 AM
-
Hello All. I could not find a shock for my '86, but I did find a complete '96 rolling chassis. If I am interpreting the parts interchange list correctly, my '86 engine will not fit in that '96 frame. Is that correct? Anybody know how serious the fit issues are? Thanks for the help.
-
It will fit, you just need to do a few mods. The 86-88 motors are a little easier to put in 250 frames because of the smaller head due to the more simple KIPS. I put together a summary of what I did to stuff an 88 engine in a 2003 250. The steps should be fairly similar (minus the head stay). I love my conversion, and while it was a lot of work it was well worth it.
http://www.kxriders.com/forums/index.php/topic,17155.0.html (http://www.kxriders.com/forums/index.php/topic,17155.0.html)
-
Thanks very much for the info. That's exactly what I needed to see. Cheers!
-
Hello All. I could not find a shock for my '86, but I did find a complete '96 rolling chassis. If I am interpreting the parts interchange list correctly, my '86 engine will not fit in that '96 frame. Is that correct? Anybody know how serious the fit issues are? Thanks for the help.
86 Motor should fit easy enough in 96kx 500rolling chassis
A few little things u would need
1:newer type inlet manifold {angle} 88 would best fit but later would do
2: bottom engine bolts will be little loose in mounting {8mm engine]/ 10mm frame}
3:U May need a head stay bracket
-
Hello All. I could not find a shock for my '86, but I did find a complete '96 rolling chassis. If I am interpreting the parts interchange list correctly, my '86 engine will not fit in that '96 frame. Is that correct? Anybody know how serious the fit issues are? Thanks for the help.
What the 96 frame a 250or 500?
-
The '96 frame is a 500.
-
i have a 87 in a 93 frame. so i can confirm that you will need a new head bracket
-
Hello All. I could not find a shock for my '86, but I did find a complete '96 rolling chassis. If I am interpreting the parts interchange list correctly, my '86 engine will not fit in that '96 frame. Is that correct? Anybody know how serious the fit issues are? Thanks for the help.
What the 96 frame a 250or 500?
That should have been my first question. :-D