KX Riders
Maintenance & Technical => KX450F / KX250F => Topic started by: umberto on July 06, 2017, 07:38:09 AM
-
I think this is right up KXDINO's alley. What is the stock triple clamp offset of the 2017 KX250F? Is it the same as the 2009 offset?
-
I found this on the Pro Circuit site. It says the stock offset is 22.5 mm. Does that sound correct?
https://www.procircuit.com/triple-clamp-kit-kx250f-450f-13-17.html (https://www.procircuit.com/triple-clamp-kit-kx250f-450f-13-17.html)
-
I found this on the Pro Circuit site. It says the stock offset is 22.5 mm. Does that sound correct?
https://www.procircuit.com/triple-clamp-kit-kx250f-450f-13-17.html (https://www.procircuit.com/triple-clamp-kit-kx250f-450f-13-17.html)
That does sound correct. If anyone would know, Pro Circuit would. Here's a link to more information you may find helpful:
http://www.kawasaki.co.nz/assets/files/pdf/KX252AHF.pdf
-
they say the 17 is 22.5 mm , the old 09 had 23.5mm i put pro circuit 22 mm on the 09 and made a difference in grip and turning , i dont think i would bother with a 17 or 18 250 f until i tested one to see if it needed it , as i heard they handle well , i would spend time on setting up the suspension and revalve to my needs.
-
Thank you Dino! I'm putting my 09 forks on my 17 conversion, and just wanted to have some options in case they didn't fit in the clamps. I'm pretty sure you can get the 09 clamps in 22.5 offset if the forks won't fit in the 17 clamps, so I should be good. I agree with you about not changing the offset. I've also heard the 17s handle really well (finally).