KX Riders

General => Introductions => Topic started by: Roger0151 on May 26, 2017, 08:07:51 AM

Title: Hello and help required from the uk
Post by: Roger0151 on May 26, 2017, 08:07:51 AM
Hello all I am wondering if anyone could help out identifying the year of my bike please 

It is a kx125 and my chassis number is : JKAKX125LLA004724

The engine number is KX125LE004886 with the numbers 1881

Any help will be greatly appreciated. Thanks
Title: Re: Hello and help required from the uk
Post by: Foxx4Beaver on May 26, 2017, 08:14:11 AM
welcome to the site Roger!
Well, if you're in the USA, this chart will work for you...going by it, it says your bike would be a 1990.
Count left to right to the 10th digit on the frame neck, which yours is an "L"...and says a '90.

http://www.kxriders.com/forums/index.php/topic,6492.0.html
Title: Re: Hello and help required from the uk
Post by: Foxx4Beaver on May 26, 2017, 08:18:09 AM
Our member Sandblaster has his own site too, with good charts on VIN's and engine I.D.'s....

http://www.oem-cycle.com/Find_Out_Year_of_bike.shtml
Title: Re: Hello and help required from the uk
Post by: Roger0151 on May 26, 2017, 08:31:00 AM
I'm from the uk does the chassis number still read the same in the uk ?

(http://i1380.photobucket.com/albums/ah184/Roger0151Roger0151/IMG_0988_zpsyuncfeln.jpg)
Title: Re: Hello and help required from the uk
Post by: Foxx4Beaver on May 26, 2017, 08:35:50 AM
no it doesn't....but that's an "L" model...which were made from '99 to '02. So have a look at the 2nd link I posted from Sandblasters site, and check on the engine I.D.s

the numbers 1881...say it's a '99.

scroll down to the 1999 model...then scroll to the right until you see "Cylinder"...it shows 1881 is '99.
http://www.oem-cycle.com/KX125KAWASAKIBIKEID.shtml
Title: Re: Hello and help required from the uk
Post by: Roger0151 on May 26, 2017, 09:20:33 AM
Okay thanks so much. I ordered fork seals for a 2002 and when they come the diamater was too small. Can order the right ones now thanks again 👍
Title: Re: Hello and help required from the uk
Post by: Foxx4Beaver on May 28, 2017, 02:25:31 AM
Okay thanks so much. I ordered fork seals for a 2002 and when they come the diamater was too small. Can order the right ones now thanks again 👍

no problem...just pay it forward.  :mrgreen: