KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: vrum on March 30, 2016, 12:58:42 AM

Title: 125 KX power valves
Post by: vrum on March 30, 2016, 12:58:42 AM

My '92 125 KDX has the cylinder barrel from a '88 125 KX which unfortunately has broken power valves. KX power valves seem to be totally N.A. nowadays so can KDX valves be adapted to work in a KX barrel? For some reason you can buy new KDX valves but not KX valves. They have different part numbers so they are not the same thing but are they close enough so that some minor adaptation work would be a solution?

Title: Re: 125 KX power valves
Post by: queen of spodes on April 19, 2016, 06:22:37 AM

Went through this a year ago with my 89 KX125 rebuild.  I lucked up and eventually found NOS LH and RH power valves.   The 125 and KDX200 valves are different.  I bought some used KDX200 valves in hopes they would work.. nope. 

There was a company in the UK with plans to start remanufacturing these old valves.. they were looking to snap up NOS valves to replicate.. can't remember the company.   Google 1989 KX125 resto vitalmx and I have a whole thread devoted to the powervalves. 

Title: Re: 125 KX power valves
Post by: vrum on June 26, 2016, 06:18:54 AM

How can I tell if my cylinder barrel was '88 or '89? As far as I know they look very similar. My barrel has numbers 1359 cast on it.

The power valves have different part numbers but are they still interchangeable (equal outside dimensions) between '88 and '89? If the only differences were just in the ports cut out dimensions then it might be possible to use '89 valves in a '88 barrel?

Title: Re: 125 KX power valves
Post by: papouch on October 05, 2018, 12:38:31 AM

cylinder 1539 -> year 1988
powervalve for 1988 and 89 are not the same
they fit into the cylinder
but have different grooves for the exhaust gases

If you need new powervalve , send me message

(http://)

Title: Re: 125 KX power valves
Post by: KXDINO on October 05, 2018, 08:10:48 AM

BDK RACE ENGINEERING, there the guys who make brand new steel powervalves for kdx 200 had a set from them , very good , dont make kx ones but if you sent them a pair to copy they might . they make or soughts of stuff for bikes . wont hurt to ask . there from uk.

Title: Re: 125 KX power valves
Post by: Kawafornication on October 05, 2018, 08:43:54 AM

BDK are on ebay https://www.ebay.co.uk/itm/KAWASAKI-KDX200-KIPS-VALVE-KITS-NEW-STEEL-REPLACEMENT-ITEMS-WITH-BUSH/263914747403?hash=item3d728b760b:g:ky0AAOSwSZBbjSGw  got to be worth a shot (Y)

Title: Re: 125 KX power valves
Post by: Kawafornication on October 05, 2018, 09:39:42 AM

Here is another one worth trying https://www.ebay.co.uk/itm/NEW-Kawasaki-kx250-1993-94-model-KIPS-power-valve-kit/123343440545?_trkparms=aid%3D444000%26algo%3DSOI.DEFAULT%26ao%3D1%26asc%3D20170221122447%26meid%3D62c86a9a703a49fd850d1499c3d6ec6e%26pid%3D100752%26rk%3D3%26rkt%3D3%26sd%3D123343440545%26itm%3D123343440545&_trksid=p2047675.c100752.m1982

Title: Re: 125 KX power valves
Post by: papouch on October 05, 2018, 05:37:14 PM

I can made it ....

Title: Re: 125 KX power valves
Post by: papouch on October 05, 2018, 05:53:30 PM

.