KX Riders

Maintenance & Technical => KX500 Original => Topic started by: valver501 on October 18, 2015, 08:14:41 AM

Title: low gear output 13129-1180
Post by: valver501 on October 18, 2015, 08:14:41 AM

hi there does anyone know where I can get hold of a 13129-1180 output low gear I can't find one anywhere running out of options thanks in advance
Paul

Title: Re: low gear output 13129-1180
Post by: sandblaster on October 18, 2015, 10:01:28 AM

http://www.partzilla.com/parts/detail/kawasaki/KP-13129-1180.html (http://www.partzilla.com/parts/detail/kawasaki/KP-13129-1180.html)
70.37 plus shipping

Title: Re: low gear output 13129-1180
Post by: valver501 on October 18, 2015, 10:27:46 PM

Thanks for the reply but I rang them and they are out of stock and no longer available from Kawasaki

Title: Re: low gear output 13129-1180
Post by: sandblaster on October 19, 2015, 02:47:59 AM

We are running into that more and more.
What is wrong with your gear?

Title: Re: low gear output 13129-1180
Post by: valver501 on October 19, 2015, 08:37:01 AM

The 'female' dog face had become rounded

Title: Re: low gear output 13129-1180
Post by: sandblaster on October 19, 2015, 09:09:03 AM

You can always have it and the mating gear under cut.

(http://www.aperaceparts.com/resources/transmissions/undercut.gif)

http://www.rcsperformanceonline.com/Transmission_s/54.htm (http://www.rcsperformanceonline.com/Transmission_s/54.htm)

Title: Re: low gear output 13129-1180
Post by: valver501 on October 26, 2015, 04:51:31 AM

Unfortunately it's got the female rounded edge type dog if that makes sense ?

Title: Re: low gear output 13129-1180
Post by: sandblaster on October 26, 2015, 07:12:10 AM

Yeah... I think it can still be done but is more expensive.
I'll see what I can find.

Title: Re: low gear output 13129-1180
Post by: Motorrad on October 26, 2015, 10:27:47 AM

Quote from: valver501 on October 19, 2015, 08:37:01 AM

The 'female' dog face had become rounded

There is an ex-wife joke in there somewhere....

Title: Re: low gear output 13129-1180
Post by: valver501 on October 29, 2015, 08:55:37 PM

Thanks guys I'm a bit at a loss as to what to do really

Title: Re: low gear output 13129-1180
Post by: sandblaster on October 30, 2015, 03:49:43 AM

I'm about ready to try undercutting one just to see if I could do one by hand.