KX Riders
Maintenance & Technical => KX250 / KX125 => Topic started by: gonzo435 on June 03, 2015, 05:21:11 AM
-
Im in need of a stator for 2001 kx250 project, has anyone had any experience with electrosport stators? Thanks.
-
I have never had any on my bike.
It is my understanding that they are made in China.
Many people have experienced problems with them.
However, was it due to bad parts or lack of knowledge on how to trouble shoot a electrical issue...
In my experience that could go either way..
My experience with Chinese motorcycle parts in general is mixed.
The quality overall has not been as good as European, US, or Japanese.
However, some of their stuff works ok and is really cheap.
Perhaps others can chime in with their experiences...
-
I agree with Sandblaster. The Chinese can be quite proficient in copying things, but the amount of quality control can vary wildly from factory to factory and even part to part within a factory. If it was me I would try to find a good used one, or if the budget allows, maybe a new one.
-
Put one on my 300MXC so far no trouble with it.
-
i used the Steahly power jet lighting kit for my 01 kx 250. My headlight and tail light run off of the coil from the carburetor power jet
http://www.steahlyoffroad.com/lighting/light-kits/powerjet-lighting-kit.html
-
I have one in my 87 KX 250....been using it for 6-7 months without any issues...
Only thing is....the wires are about 1 in. shorter than stock in my case....
They connect....but they are a little tight.
dinky,
-
electrosport stator on my 85 125 only been on their for about 3 weeks but seems to be great it fitted well.
-
I had one on my KDX220 (sold) for several years, and never had any issues.
-
Mine died it looks fine but tested crap after about 3 months dead as so thats a -1 for me now on Electrosport :(
-
Purchased one for a 2004 yz250. Never worked. Not happy. No thank you.