KX Riders
Maintenance & Technical => KX500 Original => Topic started by: fredunderwood on May 08, 2015, 09:13:54 AM
-
Recently having bouth a nice bottom end rebuild kit for my CR500, I went looking for a similar kit for a 2004 KX500.....Im having a little trouble locating a complete bottom end rebuild kit (Hotrods, Wiseco, etc.) Any help or linkls are appreciated.
-
I don't think there are any available.
I have Pinsonnault Racing build my cranks.
I order all the following parts as a minimum for the bottom end.
92028 BUSHING 92028-1551
92046 BEARING-NEEDLE 92046-1193
92022A WASHER,22.3X38X3.0 92022-1832
92022 WASHER,22.5X46X2.6 92022-1739
92045 BEARING-BALL,6001C3ML01 92045-1235
92022C WASHER,12.3X20X0.5 92022-269
92022B WASHER 92022-1942
(3) 92045 BEARING-BALL,608MC3 92045-1305
59051 GEAR-SPUR,WATER PUMP,11T 59051-1129
92028 BUSHING,26X35X14 92028-131
92045 BEARING-BALL,6305 92045-1011
92045B BEARING-BALL,63/22T2C3 92045-1134
92045C BEARING-BALL 92045-1233
92045D BEARING-BALL,608MC3 92045-1305
(2) 92046 BEARING-NEEDLE,HK1210 92046-1010
92055-1343 O-RING
(2) 92046-1052 GOVERNOR BEARING
(2) 92045-1027 BEARING
(2) 92055-035 ORING
92045-036 BEARING
92045-1235
92022-1942
92022 WASHER,17.3X28X1 92022-255
92033 RING-SNAP,24MM 92033-026
92033A RING-SNAP,18MM 92033-029
(6) 92033B RING-SNAP,25MM 92033-1089
92046 BEARING-NEEDLE,KT202614 92046-1170
92143 COLLAR,25X32X10.5 92143-1370
-
Not to be offensive , but you don't want wiseco or hotrods. Wossner is the only way to go, piston & rod both , beautiful parts they manufacture
-
Not to be offensive , but you don't want wiseco or hotrods. Wossner is the only way to go, piston & rod both , beautiful parts they manufacture
+1
-
Recently having bouth a nice bottom end rebuild kit for my CR500, I went looking for a similar kit for a 2004 KX500.....Im having a little trouble locating a complete bottom end rebuild kit (Hotrods, Wiseco, etc.) Any help or linkls are appreciated.
http://www.ebay.com/itm/Bottom-End-Engine-Bearings-Seals-Kit-Honda-CR500R-1993-1994-1995-1996-1997-Crank-/330823002648?pt=Motorcycles_Parts_Accessories&hash=item4d06966a18&vxp=mtr&afsrc=1&rmvSB=true
I would NOT buy any of these kits for a motor i would rebuild
-
it doesn't get much prettier than this...
(http://i.ebayimg.com/00/s/MzAwWDIyNQ==/z/H9IAAOSwQItUCDli/$_1.JPG)
left click and hold image to rotate....
http://www.wossnerpistons.com/images/store/wossner-usa-inc/WOS-8228D200.swf
-
I updated my basic bottom end rebuild parts list as follows:
92028 BUSHING 92028-1551
92046 BEARING-NEEDLE 92046-1193
92022A WASHER,22.3X38X3.0 92022-1832
92022 WASHER,22.5X46X2.6 92022-1739
92045 BEARING-BALL,6001C3ML01 92045-1235
92022C WASHER,12.3X20X0.5 92022-269
92022B WASHER 92022-1942
(3) 92045 BEARING-BALL,608MC3 92045-1305
59051 GEAR-SPUR,WATER PUMP,11T 59051-1129
92028 BUSHING,26X35X14 92028-131
92045 BEARING-BALL,6305 92045-1011
92045B BEARING-BALL,63/22T2C3 92045-1134
92045C BEARING-BALL 92045-1233
92045D BEARING-BALL,608MC3 92045-1305
(2) 92046 BEARING-NEEDLE,HK1210 92046-1010
92055-1343 O-RING
(2) 92046-1052 GOVERNOR BEARING
(2) 92045-1027 BEARING
(2) 92055-035 ORING
92045-036 BEARING
92045-1235
92022-1942
92022 WASHER,17.3X28X1 92022-255
92033 RING-SNAP,24MM 92033-026
92033A RING-SNAP,18MM 92033-029
(6) 92033B RING-SNAP,25MM 92033-1089
92046 BEARING-NEEDLE,KT202614 92046-1170
92143 COLLAR,25X32X10.5 92143-1370
Who knows, I may update this as time goes on :-)