KX Riders
Maintenance & Technical => KX100 / KX85 / KX80 / KX65 / KX60 => Topic started by: ironmike on October 15, 2014, 01:13:35 PM
-
Just picked up what I thought was a kx85. From the frame Vin it is a 02 kx85. In process of freshing up motor come to find out the motor is out of a kx80(motor Vin says kx80 rather than kx85. Also the piston measures approx 48mm instead of 48.5) I narrowed it down to its either 86-87 or 88-90 do to the head design. That'sas far as iI can get without some help. So what I need to know is how can I tell 86-87 motor from a 88-90? The heads appear to be the same. I've googled for hours with no luck. Plz help!!!!! Thx
-
If you can't find the answer, go to ebay and find all the kx80 engine cases and ask when the ID numbers are.
Save what you find and post here for future reference.
-
Already done that lol. That's how iI narrowed it down to these years. Hopefully somebody can help?
-
can u match up from the cdi unit 89 was dif but not sure they may look the same anyway just a thought
86 87 88 21119-1173
89 21119-1260
-
Hmmm? Not sure. All I know is they list diff pistons on dennis kirk for 86-87 vs 88-90 . So I don't know what piston to get?
-
I did notice my water pump cover says kx080g on it. When I type in 86-87 into Dennis kirk it brings up kx80g for model. Is this just sayimg its 86-87? It would ne weird that it would be on water pump cover over everything else. If any body has a 88-90 kx80 see what it says on waterpump cover? Anybody with 86-87 also check plz!!! Up Date a lot of years have that same stamping on them? Dang!!!!!!!!!
-
87 KX80 Clutch basket has 8 slots
88 and newer has 10 slots
How many does yours have?
-
You me clutch plates or basket fingers?
-
You can count the fingers or the slots...
-
Just took case off. It has 8 fingers so its a 86-87 correct? 83-85 heads are different from 86-87-88-90 and mine has that style. So I would say its 86-87 you guys agree? By the way great info on the basket thx a lot!!!!!!!
-
Another question you guys might be able to help with? The roller is a 2002. Can I run a 2002 exhaust? The exhaust that was on it was coat hangered on so I'm assuming it was also from the 87.Bolt holes ddidn't line up. Is the cylinder on the 87 motor same angle as 02 so I can run newer style exhaust? There a lot easier to find
-
Anybody?
-
Man! Mix and match! Best of luck with your project!
-
Another question you guys might be able to help with? The roller is a 2002. Can I run a 2002 exhaust? The exhaust that was on it was coat hangered on so I'm assuming it was also from the 87.Bolt holes ddidn't line up. Is the cylinder on the 87 motor same angle as 02 so I can run newer style exhaust? There a lot easier to find
Go compare the cylinder exhaust outlets for both years of cylinders as well as the exhaust pipe inlets for both years.
-
Lol yeah i would compare if i had a cylinder/ exhaust from the other year. Thats why i asked the question. Yeah pre owner rigged everything instead of using nuts/bolts. Bike does run decent even tho its pretty rigged up. Thats why im going though it. It will be nice once im done with it for min money. Only paid $300 for it. So if any body can help with the exhaust question id appreciate it !!!!!
-
Go to eBay and compare.
If there are none, check every day until one does..
Ask the seller for extra pics, they don't mind wasting their time :-D
-
Ask the seller for extra pics, they don't mind wasting their time :-D
[/quote]
That comming from past experience ?? hehe
-
I could write a book on it. :-D
-
Good advice everyone!!! I compared my pipe to pics on eBay/ net. Looks like its a 02-11 exhaust :-o that's works out great seeing they are eaiser to find. Wonder if that pipe will perform on a 86-87 motor? Really have no choice. Bike was down on compression when I got it so it was down on performance . great sight thx to all for the info and feel free to ad anything else yyou guys are thinking.
-
Hey blaster I have a kx 80 motor siting at my house are you needing parts or what? I'm not exactly sure of the year but it is a non power valve motor and it is in pretty rough shape
-
I appreciate the offer but we aren't doing any 2 stroke motors under 125cc.
We have tried a few but the parts just sit forever :|
I'd put it on your local Craigslist and see what happens.
Thanks for keeping me in mind.