KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: beatthat on January 12, 2014, 05:35:10 AM

Title: 1992 KX 125 missing parts
Post by: beatthat on January 12, 2014, 05:35:10 AM

What is missing here? It's on the right side and next to the power valve usually behind the exhaust. i know it goes to a gear inside the case and i remember reading that it was a governor or something like that a long time ago. Thanks!

(http://farm8.staticflickr.com/7411/11911575195_30de5e057d.jpg)


(http://farm4.staticflickr.com/3829/11911576945_7c7d07271e.jpg)

Title: Re: 1992 KX 125 missing parts
Post by: Goat on January 13, 2014, 04:18:44 PM

It's the power valve actuator arm that is missing. That would make it run way better if you had it. Sandblaster may have one in his pile o parts. Send him a pm or post in the wanted section. I'm sure someone will have one laying around.

Title: Re: 1992 KX 125 missing parts
Post by: sandblaster on January 13, 2014, 04:44:44 PM

I don't have one but you can see what you need here:

http://www.partzilla.com/parts/search/Kawasaki/Motorcycle/1992/KX125-J1+KX125/ENGINE+COVER/parts.html (http://www.partzilla.com/parts/search/Kawasaki/Motorcycle/1992/KX125-J1+KX125/ENGINE+COVER/parts.html)

Part 13168-1470

Title: Re: 1992 KX 125 missing parts
Post by: beatthat on January 14, 2014, 08:19:00 AM

thanks guys i ordered every part associated with it except for the lever i guess ill have to make it

Title: Re: 1992 KX 125 missing parts
Post by: sandblaster on January 14, 2014, 08:46:03 AM

I would see if I could get one from a slightly newer year say 93-94 as the basic design is the same.