KX Riders

Maintenance & Technical => KX500 Original => Topic started by: Toom038 on November 20, 2013, 05:18:53 AM

Title: air leak help
Post by: Toom038 on November 20, 2013, 05:18:53 AM

Hoping someone could help with an air leak. I found that it is leaking around the seal around the power valve actuating arm. Does the guide (part 349002-1062) install with the o-ring toward the inside of the motor or the seal towards the inside? I had the o-ring towards the outside. Not sure if it is installed wrong or if the seal and o-ring are gacked up. Both parts are new but not the guide. Thanks.

Title: Re: air leak help
Post by: Toom038 on November 20, 2013, 02:10:58 PM

Got it figured out. O-ring goes in.