KX Riders

General => In General... => Topic started by: J.ellwanger on June 21, 2013, 06:48:55 PM

Title: ...Jetting
Post by: J.ellwanger on June 21, 2013, 06:48:55 PM

 I know, I Know, I know...
  Search button,

This
"Running Maxima Super M in 92 octane fuel @ 40:1, FMF "Fatty" Pipe, VForce Delta2 Reed Cage, and an N82M needle"
   is at the top of the jetting chart page.
 ^     ^          ^           ^         ^ 
 this is what he based the results off of.
   so my question would be, will these jet settings still work for altitude with a stock pipe, same oil, not sure of reeds, and think its the stock needle, with 91 pump? 50:1 mixture.

Title: Re: ...Jetting
Post by: motopunk on June 21, 2013, 08:40:25 PM

http://www.oem-cycle.com/KX500JETTINGGUIDE.shtml

this is a good base you can work with... jetting can be diferent in exactly the same builded bikes...

the way is heat up the engine in your riding area , look at the sparkplug and so you see if it has to be richer or leaner... some people hear it also if the engine is running...

Title: Re: ...Jetting
Post by: J.ellwanger on June 22, 2013, 05:49:11 AM

 jetting can be diferent in exactly the same builded bikes...
 
 well that makes things easy... lol, ok, so i use this to start out, and just play around from there.
 sounds like a good time.