KX Riders
Maintenance & Technical => KX100 / KX85 / KX80 / KX65 / KX60 => Topic started by: cbrfrenzie on January 31, 2013, 05:31:15 AM
-
I have finally acquired all the parts needed to rebuild my sons 1997 KX60. Going with the Wiseco +2mm piston and OEM rod and bearings. I will be lightly stuffing the crank, turning down the cylinder base and recessing / re-shaping the head. Some light porting work was also done to open up the exhaust and transfers a bit for the bigger bore.
I am looking for a reputable shop that can press apart my crank, install my new OEM rod and bearings, press crank back together and balance the assembly.
I have heard good things about D&D crankshaft rebuilding service out of Eagle River WI.
Who do you all use for this service, and/or whom would you recommend?
-
I will only use Pinsonnault Racing.
My crank will be going there next week for a rebuild, weld, and balance.
http://www.kxriders.com/forums/index.php/board,38.0.html (http://www.kxriders.com/forums/index.php/board,38.0.html)
In all fairness, I have never used D&D crankshaft rebuilding service or heard anything about them.
-
+1