KX Riders
Maintenance & Technical => KX250 / KX125 => Topic started by: bingowings on November 22, 2012, 08:01:02 AM
-
Does any one know of any swing arm bearing kit for a 1979 KX250 A5 or a kit from another model which may fit?
Thanks Rob.
-
Pivot Works does'nt list the 79,but there's a slight chance they might have something that'll work.
If you have a local bearing shop near by,they should be able to get you what you need....just bring them the old bearings to be sure you get an exact fit.
There's a company next door to me called Capeway Bearing here in Plymouth,MA...they've been there for 25+years.They have every bearing for all my bikes and sleds.There's been times when I need an odd-ball one for something else,and if they don't have it,they'll make it right there on site usually in a day.
-
It is a obsolete bearing so a trip to your nearest bearing house should get you going.
If you don't have a bearing, just measure the OD of the pivot pin, the ID of the swing are pivot point, and the approximate length, a little shorter won't hurt anything.
These bikes used the same bearings.
Do a search on eBay, you never know who might have a NOS set.
1974 KX125
1974 KX125
1974 KX250
1974 KX250
1975 KX125-A
1975 KX125-A
1975 KX250-A
1975 KX250-A
1976 KX125-A3
1976 KX125-A3
1976 KX250-A3
1976 KX250-A3
1978 KX125-A4
1978 KX125-A4
1978 KX250-A4
1978 KX250-A4
1979 KLX250-A1
1979 KLX250-A1
1979 KX125-A5
1979 KX125-A5
1979 KX250-A5
1979 KX250-A5
1980 KLX250-A2
1980 KLX250-A2
-
the bearings should be no problem, what are the dimensions