KX Riders
Maintenance & Technical => KX500 Original => Topic started by: littlewing78 on May 06, 2012, 12:15:48 PM
-
I just discovered that the rim on my 01 KX 500 is not the right rim. I am trying to figure out what this rim is supposed to go with.
There are no part numbers on the hub. The rim is a DID rim and the numbers on that give me no info. Thanks for any help.
18 inch rim
17 mm axle
152mm center to center sprocket bolts 6 bolts total
125mm center to center rotor bolts 4 bolts total
160mm outside to outside from sprocket to rotor
-
Hmmm.
The last year of the 17mm axle for the KX500 was 1984 and that was a drum brake.
Can you post some detailed pics of the hub?
I have hundreds of hub photo's and a lot of detailed hub measurements to compare with.
You can check out the measurements I have posted here;
http://www.oem-cycle.com/BikeIdentification.shtml (http://www.oem-cycle.com/BikeIdentification.shtml)
-
I think I have gone through every bike on your site. The closest to what I have is on the early 80's KX250's.
I'll get some pics for you.
-
Yeah the biggest trip up is that 17mm axle...
Do you know what the outside of bearing to outside of bearing measurement is?
-
132mm ish. Hard one to measure
-
It's not hard.
Take a quarter and hold it over the ends of one of the bearings.
Insert a piece of dowel, wire, or the axle through the middle of the bearing from the opposite side of the hub until it bottoms on the quarter.
Mark the dowel, wire, or axle then pull it out and measure it.
It will be close enough for what we are doing.
-
pics
(http://i47.tinypic.com/2me7tqe.jpg)
(http://i45.tinypic.com/zwcc21.jpg)
(http://i48.tinypic.com/2enx7av.jpg)
-
Looks like a Honda XR wheel.
Let me see what I can find.
-
more
(http://i47.tinypic.com/2e1xht1.jpg)
(http://i47.tinypic.com/4s0kyc.jpg)
(http://i45.tinypic.com/qy7c0n.jpg)
-
(http://i45.tinypic.com/ixdxrc.jpg)
(http://i46.tinypic.com/fvxttx.jpg)
(http://i46.tinypic.com/21exe1z.jpg)
-
Here is some hub specs:
FITS 97-09 XR650L ? 42635-MY6-880
AXLE DIA 17MM - BRG TO BRG 132-133MM - ROTOR BC 4 ON 125MM - SPROCKET BC 6 ON 153MM ?
Here is another:
FITS 96-04 XR400R ? 42601-KCY-670
AXLE ID 17MM ? BRG TO BRG 133-134MM ? ROTOR 4X 125MM BC ? SPROCKET 6X 153MM BC ? 32 SPOKES
Here is the rim info:
FITS 91-00 XR600R, 96-04 XR400R, 00-07 XR650R ? 42701-MN1-682
DID JAPAN 82 1708 11 J 18X2.15 4 96 DOT ? 32 SPOKES
I'll get some pics posted but it will take me a bit.
-
Bingo!!! That's awesome that you could guess that from pics. Thanks so much.
-
XR400R wheel.
(http://i644.photobucket.com/albums/uu165/oemcycle/XR400R%20HONDA%202002%20XR400%2002%20XR%20400%20PICS%20AND%20MEASURE/DSCN7865.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR400R%20HONDA%202002%20XR400%2002%20XR%20400%20PICS%20AND%20MEASURE/DSCN7866.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR400R%20HONDA%202002%20XR400%2002%20XR%20400%20PICS%20AND%20MEASURE/DSCN7863.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR400R%20HONDA%202002%20XR400%2002%20XR%20400%20PICS%20AND%20MEASURE/DSCN7864.jpg)
-
Thanks Sandblaster. Now...who wants to buy a Honda XR rim?
-
Here is the XR650L pics
(http://i644.photobucket.com/albums/uu165/oemcycle/XR650L%20HONDA%202002%20XR%20650%20L%2002/P1010080.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR650L%20HONDA%202002%20XR%20650%20L%2002/P1010078.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR650L%20HONDA%202002%20XR%20650%20L%2002/P1010083.jpg)
(http://i644.photobucket.com/albums/uu165/oemcycle/XR650L%20HONDA%202002%20XR%20650%20L%2002/P1010081.jpg)
-
Comparing the pics I vote for the XR650L
-
Wonder how it ended up on a KX 500. It had to be shoehorned into the swing arm.
-
Someone must have made some custom chain adjustment blocks.
The hub widths are close enough to work.
-
Nope the blocks still fit the KX axle. When its all tight it didn't make a difference.
-
Shows you what little I know :-)