KX Riders

Maintenance & Technical => KX250 / KX125 => Topic started by: hillclimbjim on February 19, 2012, 03:43:49 AM

Title: KX125/250 SWINGARM
Post by: hillclimbjim on February 19, 2012, 03:43:49 AM

is a 2001,125 swingarm the same as a 250 where the axel bolt and blocks are,the 125 is 55.78 mm.thanks

Title: Re: KX125/250 SWINGARM
Post by: sandblaster on February 19, 2012, 02:49:57 PM

Hello.
The Swing arm pivot pin and the shock arm linkage are the same for the 01 kx125 and 01 kx250.
They also use the same rear hub and rear axle.
The swing arms have different part numbers so my guess is that the 125 swing arm is probably a little shorter.
I have a 01 kx125 swing arm but I don't have one for the 250 to see the difference.

Title: Re: KX125/250 SWINGARM
Post by: don46 on February 20, 2012, 02:58:32 AM

as i recall the 250 swingarm was a bit longer than the 125, not huge but a bit. then again maybe i'm thinking 250f and 450f, the 450 is longer than the 250

Title: Re: KX125/250 SWINGARM
Post by: hillclimbjim on February 20, 2012, 08:43:18 AM

look to see if a set of hillclimb extentions from a 250 will bolt up to a 125,thanks for the help