Maintenance & Technical > KX500 Original
traded xbox 360 for this bike.. excited
Green Machine Beast:
i kno it gaskets good well top end i put them on but bottom end not sure didnt check but doesnt leak no type of fluids and afterr i put reeds it seems liks it want to hit but i havent really pushed it still in breakin in stage on piston and rings heard u must wait and all together prob between idle and quick spin bike has been on mayb 2 hours in my posession.. and whats kips how do i see if they move, when i took bolt out to and assembled crank was good no loose play
Green Machine Beast:
i will try smaller main jet size and spark was nice brown color so thats good so think im close to where i need to be checked that yesterday after putin new spark on
kwakman:
brown is close, be careful not to go to far down, she may have been dropped already....what no is the m/j?K.
Green Machine Beast:
300 somethin but on that carb mikuni 38mm realized main jet sleeve was broken where u screw it on so i replaced carb with keihin 36mm pj carb 170 main 68 pilot runs great low mid and top but wont idle and when i turn on gas to start it.. carb leaks alot from overflow line on bottom in back dont know why.. to big a pilot?
kwakman:
worn or badly adjusted fuel valve/seat.she'll go better with a 38 or 40mm vm, 40mm was standard 86 kx5 carb,went to 38 in 87.K.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version