Maintenance & Technical > KX500 Original

cross referencing part numbers.

(1/2) > >>

tunster:
Ive just cross referenced some parts on ron ayers site.Although the first part numbers are the same,the second set of number differ.Can anyone explain why this is?The numbers i am looking at are 13095-1206 and 13095-1153. :?

jonny500:
i can probably help but i need more info what part, what bike, what year, what you trying to achieve ect ect ect :-D

tunster:
Hi John the part numbers refer to a 1988 k5 clutch basket and a 1991 kx250 clutch basket.Ive seen a complete clutch on ebay for a 1991 and just wanted to check it will fit? Ive seen other parts that i think may be interchangeable but as the part numbers differ on the second set of number im not sure?

sandblaster:
Hello.
Here is one way to look up parts interchangeability.
As an example, lets say you want to look up the front fender for a 1985 kx500.
1. Go to www.bikebandit.com
2. Under OEM Parts, Click on "Kawasaki"
3. Click on "Off-road"
4. Click on "1985"
5. Click on "kx500"
6. Click on "KX500(KX500B1)US"
7. Click on the tab that says "Body and Fenders"
8. Click on the picture that says "Fenders" under it.
9. Find the BikeBandit.com Part Number. In this case it is 804273.
10. Copy that number and paste it into the "Search bikebandit.com" box at the upper right side of the page, and hit the search button.
11. Scroll down until you see the "Fits Machine" link and click on it.
You will see that the front fender is identical to these:
1985 Kawasaki KX125(KX125D1)US
1985 Kawasaki KX250(KX250D1)US
1985 Kawasaki KX500(KX500B1)US

Repeat these basic steps for other parts.
As a side note, just because no other parts show up that are identical to the front fender does not mean that other parts won't fit.
A color, vendor, or style change will cause a different number to be used.
Hope this helps.

tunster:
excuse me for being dumb but where is the fits machine link?

Navigation

[0] Message Index

[#] Next page