Maintenance & Technical > KX500 Original
On the subject of engine work
kaw rider:
RD
What year is your bike and what spec did you use.
sandblaster:
Hey Kawrider
What are the specs for a 00 K5?
dave916:
i think it should be standard or thin head gasket with two base gaskets
kaw rider:
i think its around 170-230 ohms, doug knows the spec too. i can check tonight.
DoldGuy:
--- Quote from: kaw rider on February 10, 2011, 08:04:36 AM ---i think its around 170-230 ohms, doug knows the spec too. i can check tonight.
--- End quote ---
153-230 Ohms: Black/White to Black/Yellow
7.9-11.9 Ohms: White/Red to Black/Yellow
These specs are for the 1989 (with big flywheel) all the way up to the 2004. They have had a change in part #s, but the values are still the same on all. The Clymer book has these listings & confirmed the OEM Kawi manual does too.
RD, Very curious as to what your Stator measures as I have had measurements taken on ALOT of these & as Pauly stated 9 out of 10 were out of range. My 2001 stator visually looks almost new but it measures @ 330 Ohms :-(
DoldGuy
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version