Maintenance & Technical > KX500 Original

front end delima! ahhhhhhh

<< < (3/3)

DoldGuy:
Crazy O B,

Go into the kitchen & spool off about 2' of the little ladies wax paper. Use it as your seal bullet to cover BOTH edges where your bushing goes. Apply some grease on the wax paper & on your inner part of the seal & dust seal, they will slide right on with no tears. Plus you don't have to clean a seal bullet when done :-D

DoldGuy

crazyolbastard:
that`s usin it for more that a hat rack.

great tip D

meangreen500:
a plastic zip lock works too. put grease on and slip it over.

ktmdude:
I have used the bag that the seals come in with a little fork oil, works fine. Samwitch bags work well also. I did a over hall on the girlfriends dads forks and he gave me a bullet, so I have one now. It is a bit nicer but not nessary.

crazyolbastard:
got all the parts I need and the seal driver, all the parts that is except the bushing kit.
anyways, I threw the forks back together cuz I am jonesin`
I need to ride.  I need to ride now!
thanks for all the tips guys.
the bushin kit is on backorder at cheap cycle parts til the 27th of July.
til then let them leak a lil oil.
I know where the car wash is.

Navigation

[0] Message Index

[*] Previous page