Maintenance & Technical > KX500 Original

eline stator help

(1/2) > >>

slow600:
need some help from anyone who is familiar with the eline stators. there are three wires coming out, 2 yellow and one red. i originally was told the yellows were separate 100w powers and the red was a ground. well after making a harness from scratch and failing, i am starting to doubt this. can anyone tell me for sure which wires are what. i have searched and searched for info on the net with dismal results. thanks

Speedway73:
Found this on the 'net. Supposedly came from a tech @ Baja Designs.

http://www.bajadesigns.com/2005%20Web%20Site/PDF%20Files/BATREG3.pdf

BDI:
If I remember right you can run two lights, one on each yellow wire at 100w or you can run both yellow wires to one light at 200w.

ZETTNORCAL:
I also have an E-line on my Honda 500AF and can not for the life of me make it power up a light. I have also searched for countless hours trying to figure it out. I get around 18-26 volts AC at idle, from either of the yellow wires. I was told to just tape off one of the yellows. I was also told that the red was a floating ground?  I just don't know?  I have tried every combination of hook up. With several different regulators.........No light..... not even a flicker?

The Flyin Hawaiian:
Try calling E Line.

Navigation

[0] Message Index

[#] Next page