Maintenance & Technical > KX500 Original

Fork guru's

<< < (2/3) > >>

drewh14:
Never heard of anyone separating those two. Are you sure its leaking? or is it just dribbling down from the seal, and pooling around there, making it look like its leaking from there instead??

Purpletj:
there is oi seeping around the chrome tube and the axle leg. yes it has to come apart. How do I do it???

DoldGuy:
You DONT remove!

If it leaks there it needs to be replaced. They are not made to come apart.

Purpletj:

--- Quote from: DoldGuy on March 09, 2010, 02:07:43 PM ---You DONT remove!

If it leaks there it needs to be replaced. They are not made to come apart.

--- End quote ---


My best Gomer Pyle Voice  "Gooolly" Is that threads I see??? I think I proved some one wrong. I knew it would either be pressed or threaded. Alluminum and steel don't just bond together magically.

KXDINO:
they usually only take them apart if they are leaking. all you want to change the bottom offset, when i was at race tech they show us how to do it but i would never do that in a normal rebuild all revalve.  tell us how you go but you've got to use locktite when you put them back together.

Navigation

[0] Message Index

[#] Next page

[*] Previous page