Maintenance & Technical > KX500 Original

transmission issue

<< < (3/3)

kwakman:
im just glad im not one of his kids.......... :-D

BDI:

--- Quote from: DoldGuy on February 17, 2010, 01:51:38 PM ---Thats why we have you BDI  :-D

--- End quote ---
I know I rub peoples fur the wrong way some times but I honestly have everyones best interest at heart. I'm sure thats the only reason danger has not tossed me off the site  :-D

madmick:
greencannon,one thing comes to mind that a lot of people dont know is that when installing your circlip there is a rounded edge on 1 side,top(from the stamping out process when manufactured) and 1 straight edge,bottom.you need to work out which side most of the inertia(forces)are coming from and have the circlip with the straight edge facing in that direction,as it would be harder for the clip to ride over the groove as it will have a longer face(more surface contact area)as both edges will have a 90 degree edge therefore harder to ride over it,and if installed the other way it acts like a chamfer(lead),and with less force will want to open slightly and move over the groove..but in saying that because it has happened a couple of times you more than likely have some damage(wear)in that groove and no matter what way you face your straight edge you will keep having the same problem.?.does that make any sense.i know its an old post but if it helps 1 person out there from that same problem..my job is done..remember..better your sister in a brothel than your brother on a 4/stroke..hee hee hee..and if your 5hunghy ends up killing you..?.have this written on your gravestone..I KNEW I SHOULD OF BET ON THEM 65 HORSES RATHER THAN RIDE THEM..ride hard bro..madmick..(im not realy mad i just get cranky sometimes)..double hee hee hee..later..hope someone got a laugh,cause sometimes it is better to laugh than cry..dont know who wrote that but he was proberly a clown rather than a sook(cry baby)..later..heh heh heh...

Navigation

[0] Message Index

[*] Previous page