Maintenance & Technical > KX500 Original

Clutch

<< < (4/4)

mikesmith:
I see Rocky Mtn has a second cable luber in the catalog made by Tusk for $7.99.

Rick:
I use a cable lube tool I have had around for about 9 years, so have no idea who manufactured, but they are al built about the same.  Once installed, I use carb clearner and spray through the cable to clean it out.  Using an air hose, I spray into the lube hole made for the little red hose from the can to help the carb cleaner flash.  I then spray with WD40 until it is coming out the bottom.  Finally, I use only stock cables, as I have found them to outlast after market cables I have tried, and I usually replace my cables about every 12-18 months.

Rick

Navigation

[0] Message Index

[*] Previous page